Home > 62300-series > 62307 Bearing

62307 Bearing 35x80x31mm | RHD Bearings

The powerlifter of the bearing world - thirty-five millimeter bore with serious bulk.

Meet the 62307: With 3995kg (39.2kN) of engineering excellence and 35mm precision, this bearing delivers the perfect blend of personality and performance for your critical applications. The most widely used bearing in electronics, small motors, and precision instruments.

35mm
Bore Diameter
80mm
Outer Diameter
31mm
Width
39.2 kN
Load Rating
3995 Kg
Load Capacity
0.68 Kg
Weight
Technical Specifications Applications 📞 Call +91-9702081858
62307 Bearing 35×80×31mm - RHD Bearings

62307 BEARING SPECIFICATIONS

Precision-engineered for reliability and performance

🔍 Common Search Terms

62307 bearing specifications 35mm bore bearing with 80mm outer diameter 62307 bearing load capacity and speed rating 62307 bearing dimensions and weight 62307 bearing seal options and applications 62307 bearing cross reference and replacement

📏Dimensions

d - ID (Bore Diameter)
35mm
D - OD (Outer Diameter)
80mm
B - Width
31mm
d₁ - Shoulder Diameter
≈49.56mm
D₂ - Recess Diameter
≈69.2mm
r₁,₂ - Chamfer Radius
min. 1.5mm
62307 Bearing: 35 × 80 × 31mm

Cross-Sectional View

62307 Bearing Cross-Sectional View

⚡Load Ratings

Dynamic Load (Cr) 39.2kN
Static Load (Cor) 11.0kN
Load Capacity (kN) 39.2kN
Load Capacity (kg) 3995kg

ðŸ’ĄWhat This Means

Dynamic Load (39.2kN): Maximum force while rotating. Exceeding this causes rapid wear and failure within hours.
Static Load (11.0kN): Maximum force when stationary. Use 80% for safety.
Calculate Your Load: Measure shaft forces, belt tensions, or gear loads. Include shock/vibration factors.
Failure Warning: Overloading causes bearing raceways to crack and balls to flatten permanently.

🔄Speed Limits

Grease Lubrication 8800 RPM
Oil Lubrication 10000 RPM
RHD Z2V2 Bearings 1400 RPM
RHD Z3V3 Bearings 2880 RPM
RHD Z4V4 Bearings 6000+ RPM

ðŸ’ĄWhat This Means

Grease Limit (8800 RPM): Heat generation increases exponentially above this. Grease breaks down, causing seizure.
Oil Advantage (10000 RPM): Better heat dissipation allows higher speed. Required for high-speed spindles.
Safe Operating Speed: Use 90% of limit (7920 RPM) for maximum L10 life of 10,000+ hours.
Failure Mode: Exceeding speed causes cage failure, ball skidding, and catastrophic overheating within minutes.

🔧Material & Quality

Steel Grade SAE52100
Ball Grade G10
Carbon Content 0.95-1.05%
Chromium Content 1.40-1.65%
ISO Standard 15:2011 Compliant

ðŸ’ĄWhat This Means

SAE52100 Chrome Steel: Premium bearing steel - harder than tool steel
G10 Balls: Ultra-precision balls with Âą0.25Âĩm tolerance
High Carbon: Superior hardness and wear resistance
Chromium: Adds corrosion resistance and toughness
ISO Standard: Fits any 62307 application worldwide

📊Vibration Classes

V2 Grade
Low: 150 Ξm/s
Med: 120 Ξm/s
High: 100 Ξm/s
V3 Grade
Low: 90 Ξm/s
Med: 75 Ξm/s
High: 60 Ξm/s
V4 Grade
Low: 70 Ξm/s
Med: 42 Ξm/s
High: 45 Ξm/s

ðŸ’ĄWhat This Means

V2 Grade: Standard grade - good for general applications
V3 Grade: Low vibration - like a smooth car engine
V4 Grade: Ultra-smooth - for precision instruments
Frequency Bands: Measured across different rotation speeds

🔇Noise Levels

Z2 Grade < 46 dB
Z3 Grade < 43 dB
Z4 Grade (Quiet) < 39 dB
Application Precision Equipment

ðŸ’ĄWhat This Means

Z2 Grade: Quiet as a library - good for most applications
Z3 Grade: Very quiet - like a whisper (40 dB = normal whisper)
Z4 Grade: Ultra-quiet - perfect for bedroom fans, medical equipment
Application: Ideal for sensitive environments

⚙ïļInternal Clearance

C2 (Tight) 1-11 Ξm
C0 (Normal) 6-20 Ξm
C3 (Loose) 15-33 Ξm
C4 (High Temp) 28-46 Ξm
C5 (Extra High Temp) 40-64 Ξm

ðŸ’ĄWhat This Means

C2 (Tight): Precision applications - less play, more accurate
C0 (Normal): Standard choice - works for most applications
C3 (Loose): Better for hot environments - allows thermal expansion
C4 (Exta Loose): Hot or tight-fit setups — extra room for thermal expansion.
C5 (Max Loose): Extreme heat/tight fits or near-limit speeds — maximum expansion allowance

SEAL OPTIONS

Choose the right protection for your application

62307-ZZ

Most Popular

Double metal shields

Speed Factor: 0.9 (7920 RPM)
Protection: Dust protection
Lubrication: Sealed for life

When to Use 62307-ZZ

Best For: Electronics, small motors, skateboards, general machinery
Conditions: Dry environments, moderate dust, precision applications
Achieves: Excellent balance of speed and protection for most applications
Avoid When: Heavy water exposure, chemical environments, food processing

62307-2RS

Protected

Double rubber seals

Speed Factor: 0.7 (6160 RPM)
Protection: Moisture and dust
Lubrication: Sealed for life

When to Use 62307-2RS

Best For: Outdoor applications, appliances, automotive systems, dirty environments
Conditions: Moisture, dust, contamination, washdown areas, food processing
Achieves: Maximum protection and zero maintenance requirements
Trade-off: Lower speed limit but superior environmental protection

62307

High Speed

Open bearing, no seals

Speed Factor: 1.0 (8800 RPM)
Protection: None
Lubrication: External required

62307-Z

Balanced

Single metal shield

Speed Factor: 0.95 (8360 RPM)
Protection: Light dust protection
Lubrication: Pre-greased

62307-RS

Protected

Single rubber seal

Speed Factor: 0.8 (7040 RPM)
Protection: Moisture and dust
Lubrication: Pre-greased, sealed

APPLICATIONS

Precision performance across industries

Industrial Fans

  • Ventilation system fans
  • Cooling tower blowers
  • Air handling fan shafts
  • Heat exchanger fans
  • Refrigeration unit blowers
  • Dust collector fans
  • Industrial exhaust motors
  • Greenhouse ventilation fans

Key Requirements: 35mm shaft with 21.0kN (≈2,140kg) dynamic load capacity, 8,500 RPM grease lubrication, 77×27mm suitable for fan drives

Heavy Machinery

  • Mining equipment shafts
  • Construction machine pivots
  • Bulk material handlers
  • Industrial mixers
  • Agricultural machinery parts
  • Forestry machinery joints
  • Conveyor drive shafts
  • Heavy duty crushers

Key Requirements: Precision 35mm bore with 12.7kN (≈1,295kg) static load rating for heavy tasks

Machine Components

  • Printing press rollers
  • Packaging machine spindles
  • Industrial agitators
  • Food processing rollers
  • Textile machinery shafts
  • Assembly line components
  • Material feeder rollers
  • Workshop tool shafts

Key Requirements: 35mm bore, 27mm width for durable machinery parts

Compatible Models & Shaft Requirements

Find bearings with the same bore size and ensure proper shaft preparation

🔄Related Models

62301 (12×37×17mm) 62302 (15×42×17mm) 62303 (17×47×19mm) 62304 (20×52×21mm)

🔧Shaft Requirements

Nominal Diameter 35.000mm
Tolerance Grade h6 (34.987-35.013mm)
Surface Finish Ra 0.8Ξm max
Runout Tolerance 0.013mm max

ðŸŽŊApplication-Specific Options

High Temperature: C3 clearance recommended
High Speed: RHD V3 & V4 bearings recommended
Corrosive Environment: SS (Stainless Steel) bearings recommended

Professional Expertise & Standards

Technical insights from 20+ years of bearing engineering and manufacturing excellence

📋ISO Compliance

ISO 15:2011 compliant dimensions ensure interchangeability with global bearing standards and seamless replacement in existing equipment.

🔎Material Science

Gcr15 chrome steel composition optimized for wide-bodied bearing applications, providing superior hardness, wear resistance, and fatigue life.

⚙ïļPrecision Engineering

C0 clearance standard for most applications, C3 available for high-temperature use. h6 shaft tolerance recommended for optimal performance.

🔧Professional Installation

Professional installation required for maximum 50,000-hour service life. Proper tools and techniques prevent 80% of premature failures.

📊Performance Comparison

Handles 11.0kN more load than typical 35mm bearings while maintaining compact design. Superior Gcr15 steel vs. standard steel in competing products.

💰Value Engineering

Best value in wide-bodied bearing category for 39.2kN performance. Quality bearings last 3-10x longer than cheap alternatives, reducing total cost of ownership.

FREQUENTLY ASKED QUESTIONS

Expert guidance for 62307 bearing applications

Bearing Selection & Replacement ▾

What makes 62307 bearing suitable for wide-bodied applications?

62307 features 31mm width (vs 12mm standard) providing enhanced load distribution and stability for demanding applications.
Why This Matters
Wide-bodied design reduces stress concentration, extends bearing life, and improves overall system reliability.
How To Handle It
Verify housing dimensions accommodate 31mm width and ensure proper alignment during installation.
Wide-bodied bearings are ideal for applications with high radial loads or where space allows for increased width.

Can 62307 replace standard 35mm bore bearings?

Yes, 62307 can replace standard 35mm bore bearings when enhanced load capacity and stability are required.
Why This Matters
Provides upgrade path for applications experiencing premature bearing failures or requiring higher load ratings.
How To Handle It
Check housing width compatibility (31mm vs 12mm standard) and verify load requirements match 3998.4kg (39.2kN) rating.
Always verify dimensional compatibility before replacement, especially width requirements.

What are the key advantages of 62307 over standard 35mm bearings?

62307 offers 31mm width, 3998.4kg (39.2kN) dynamic load capacity, and enhanced stability compared to standard 35mm bearings.
Why This Matters
Wide-bodied design provides superior load distribution, reduced stress, and extended service life.
How To Handle It
Evaluate application requirements and space constraints to determine if wide-bodied design is beneficial.
Consider 62307 for applications with high radial loads or where bearing life is critical.
Installation & Maintenance ▾

What are the proper installation procedures for 62307 bearing?

Use proper tools, maintain cleanliness, apply appropriate force, and ensure correct alignment for 62307 installation.
Why This Matters
Proper installation prevents damage, ensures optimal performance, and maximizes bearing service life.
How To Handle It
Clean shaft and housing, use bearing puller/installer, apply force to inner ring only, and verify smooth rotation.
Never apply force to outer ring during installation as it can damage bearing components.

How often should 62307 bearing be lubricated?

Lubrication frequency depends on operating conditions, speed, and load, typically every 6-12 months for normal applications.
Why This Matters
Proper lubrication reduces friction, prevents wear, and extends bearing service life significantly.
How To Handle It
Use high-quality grease suitable for bearing application, apply appropriate quantity, and monitor lubrication condition regularly.
Over-lubrication can cause overheating, while under-lubrication leads to premature failure.

What maintenance practices extend 62307 bearing life?

Regular inspection, proper lubrication, contamination control, and monitoring operating conditions extend 62307 bearing life.
Why This Matters
Proactive maintenance prevents premature failures, reduces downtime, and optimizes system performance.
How To Handle It
Establish maintenance schedule, monitor vibration and temperature, and replace bearings before catastrophic failure.
Keep detailed maintenance records to identify patterns and optimize maintenance intervals.
Troubleshooting & Problem Solving ▾

What causes 62307 bearing premature failure?

Common causes include contamination, improper lubrication, misalignment, overloading, and incorrect installation.
Why This Matters
Identifying failure causes helps prevent recurrence and improves system reliability.
How To Handle It
Analyze failed bearing, check operating conditions, and implement corrective measures.
Keep failed bearings for analysis to identify root causes and prevent future failures.

How to diagnose 62307 bearing problems?

Monitor vibration, temperature, noise levels, and visual inspection to diagnose 62307 bearing problems.
Why This Matters
Early detection allows for planned maintenance and prevents catastrophic failures.
How To Handle It
Use vibration analysis tools, infrared thermography, and regular visual inspections.
Establish baseline measurements when bearing is new to detect changes over time.

What are signs of 62307 bearing wear?

Signs include increased vibration, temperature rise, noise changes, and visual wear patterns on raceways and balls.
Why This Matters
Early detection of wear allows for planned replacement and prevents unexpected failures.
How To Handle It
Monitor operating parameters, perform regular inspections, and replace bearings when wear exceeds limits.
Document wear patterns to improve bearing selection for future applications.
Cost & Performance Optimization ▾

How does 62307 bearing compare in cost-performance ratio?

62307 offers excellent cost-performance ratio with 3998.4kg (39.2kN) load capacity and extended service life.
Why This Matters
Optimal cost-performance ratio reduces total cost of ownership and improves system efficiency.
How To Handle It
Compare initial cost vs. service life, maintenance requirements, and performance benefits.
Consider total cost of ownership, not just initial purchase price.

What factors affect 62307 bearing total cost of ownership?

Factors include initial cost, service life, maintenance requirements, downtime costs, and replacement frequency.
Why This Matters
Understanding total cost of ownership helps make informed decisions and optimize system performance.
How To Handle It
Calculate all costs over bearing service life and compare with alternatives.
Quality bearings often provide lower total cost of ownership despite higher initial cost.

How to optimize 62307 bearing performance and reduce costs?

Optimize through proper selection, installation, lubrication, and maintenance practices.
Why This Matters
Optimized performance reduces operating costs, extends service life, and improves system reliability.
How To Handle It
Follow manufacturer recommendations, implement preventive maintenance, and monitor performance.
Invest in proper tools and training for installation and maintenance to maximize bearing performance.
ðŸ”Ĩ FAST DELIVERY

Need 62307 Bearings Today?

Get instant pricing and availability for premium 62307 bearings. Same-day dispatch available for orders before 2 PM.

⚡

Instant Quote

Real-time pricing & availability

🚀

Same Day Dispatch

Orders before 2 PM ship today

🏆

Premium Quality

ISO certified, 20+ years expertise

📞 Call Now +91-9702081858 📧 Email Quote Instant Response
RHD Bearings Your Trusted Bearing Partner
📍 203 Vihar Estate, Sakinaka, Andheri East, Mumbai 400072
OEM Sales: oemsales@rhdenterprise.in
Bulk Orders: Significant discounts available
BEARINGS