Home > 62300-series > 62303 Bearing

62303 Bearing 17x47x19mm | RHD Bearings

Seventeen millimeter bore with the substantial presence of someone who takes up space confidently.

Meet the 62303: With 1478kg (14.5kN) of engineering excellence and 17mm precision, this bearing delivers the perfect blend of personality and performance for your critical applications. The most widely used bearing in electronics, small motors, and precision instruments.

17mm
Bore Diameter
47mm
Outer Diameter
19mm
Width
14.5 kN
Load Rating
1478 Kg
Load Capacity
0.17 Kg
Weight
Technical Specifications Applications 📞 Call +91-9702081858
62303 Bearing 17×47×19mm - RHD Bearings

62303 BEARING SPECIFICATIONS

Precision-engineered for reliability and performance

🔍 Common Search Terms

62303 bearing specifications 17mm bore bearing with 47mm outer diameter 62303 bearing load capacity and speed rating 62303 bearing dimensions and weight 62303 bearing seal options and applications 62303 bearing cross reference and replacement

📏Dimensions

d - ID (Bore Diameter)
17mm
D - OD (Outer Diameter)
47mm
B - Width
19mm
d₁ - Shoulder Diameter
≈26.52mm
D₂ - Recess Diameter
≈39.58mm
r₁,₂ - Chamfer Radius
min. 1.0mm
62303 Bearing: 17 × 47 × 19mm

Cross-Sectional View

62303 Bearing Cross-Sectional View

⚡Load Ratings

Dynamic Load (Cr) 14.5kN
Static Load (Cor) 3.58kN
Load Capacity (kN) 14.5kN
Load Capacity (kg) 1478kg

ðŸ’ĄWhat This Means

Dynamic Load (14.5kN): Maximum force while rotating. Exceeding this causes rapid wear and failure within hours.
Static Load (3.58kN): Maximum force when stationary. Use 80% for safety.
Calculate Your Load: Measure shaft forces, belt tensions, or gear loads. Include shock/vibration factors.
Failure Warning: Overloading causes bearing raceways to crack and balls to flatten permanently.

🔄Speed Limits

Grease Lubrication 16000 RPM
Oil Lubrication 19000 RPM
RHD Z2V2 Bearings 1400 RPM
RHD Z3V3 Bearings 2880 RPM
RHD Z4V4 Bearings 6000+ RPM

ðŸ’ĄWhat This Means

Grease Limit (16000 RPM): Heat generation increases exponentially above this. Grease breaks down, causing seizure.
Oil Advantage (19000 RPM): Better heat dissipation allows higher speed. Required for high-speed spindles.
Safe Operating Speed: Use 90% of limit (14400 RPM) for maximum L10 life of 10,000+ hours.
Failure Mode: Exceeding speed causes cage failure, ball skidding, and catastrophic overheating within minutes.

🔧Material & Quality

Steel Grade SAE52100
Ball Grade G10
Carbon Content 0.95-1.05%
Chromium Content 1.40-1.65%
ISO Standard 15:2011 Compliant

ðŸ’ĄWhat This Means

SAE52100 Chrome Steel: Premium bearing steel - harder than tool steel
G10 Balls: Ultra-precision balls with Âą0.25Âĩm tolerance
High Carbon: Superior hardness and wear resistance
Chromium: Adds corrosion resistance and toughness
ISO Standard: Fits any 62303 application worldwide

📊Vibration Classes

V2 Grade
Low: 110 Ξm/s
Med: 78 Ξm/s
High: 60 Ξm/s
V3 Grade
Low: 65 Ξm/s
Med: 46 Ξm/s
High: 35 Ξm/s
V4 Grade
Low: 52 Ξm/s
Med: 25 Ξm/s
High: 25 Ξm/s

ðŸ’ĄWhat This Means

V2 Grade: Standard grade - good for general applications
V3 Grade: Low vibration - like a smooth car engine
V4 Grade: Ultra-smooth - for precision instruments
Frequency Bands: Measured across different rotation speeds

🔇Noise Levels

Z2 Grade < 41 dB
Z3 Grade < 36 dB
Z4 Grade (Quiet) < 31 dB
Application Precision Equipment

ðŸ’ĄWhat This Means

Z2 Grade: Quiet as a library - good for most applications
Z3 Grade: Very quiet - like a whisper (40 dB = normal whisper)
Z4 Grade: Ultra-quiet - perfect for bedroom fans, medical equipment
Application: Ideal for sensitive environments

⚙ïļInternal Clearance

C2 (Tight) 0-9 Ξm
C0 (Normal) 3-18 Ξm
C3 (Loose) 11-25 Ξm
C4 (High Temp) 18-33 Ξm
C5 (Extra High Temp) 25-45 Ξm

ðŸ’ĄWhat This Means

C2 (Tight): Precision applications - less play, more accurate
C0 (Normal): Standard choice - works for most applications
C3 (Loose): Better for hot environments - allows thermal expansion
C4 (Exta Loose): Hot or tight-fit setups — extra room for thermal expansion.
C5 (Max Loose): Extreme heat/tight fits or near-limit speeds — maximum expansion allowance

SEAL OPTIONS

Choose the right protection for your application

62303-ZZ

Most Popular

Double metal shields

Speed Factor: 0.9 (14400 RPM)
Protection: Dust protection
Lubrication: Sealed for life

When to Use 62303-ZZ

Best For: Electronics, small motors, skateboards, general machinery
Conditions: Dry environments, moderate dust, precision applications
Achieves: Excellent balance of speed and protection for most applications
Avoid When: Heavy water exposure, chemical environments, food processing

62303-2RS

Protected

Double rubber seals

Speed Factor: 0.7 (11200 RPM)
Protection: Moisture and dust
Lubrication: Sealed for life

When to Use 62303-2RS

Best For: Outdoor applications, appliances, automotive systems, dirty environments
Conditions: Moisture, dust, contamination, washdown areas, food processing
Achieves: Maximum protection and zero maintenance requirements
Trade-off: Lower speed limit but superior environmental protection

62303

High Speed

Open bearing, no seals

Speed Factor: 1.0 (16000 RPM)
Protection: None
Lubrication: External required

62303-Z

Balanced

Single metal shield

Speed Factor: 0.95 (15200 RPM)
Protection: Light dust protection
Lubrication: Pre-greased

62303-RS

Protected

Single rubber seal

Speed Factor: 0.8 (12800 RPM)
Protection: Moisture and dust
Lubrication: Pre-greased, sealed

APPLICATIONS

Precision performance across industries

Power Tools

  • Cordless drill spindles
  • Saw blade shafts
  • Rotary tool motors
  • Sander drives
  • Grinder spindles
  • Polisher shafts
  • Handheld mixer motors
  • Power screwdriver rotors

Key Requirements: 17mm shaft with 10.5kN (≈1,070kg) dynamic load capacity, 14,000 RPM grease lubrication, 47×19mm profile optimized for power tools

Automation Systems

  • Robotic pick and place arms
  • Material handling joints
  • Automated welding robot pivots
  • Inspection camera mounts
  • CNC machine pivot joints
  • Assembly line robot wrists
  • Manufacturing robot pivots
  • Lab automation equipment

Key Requirements: Precision 17mm bore with 5.1kN (≈520kg) static load for precise automation

Conveyor Units

  • Automated conveyor shafts
  • Sorting line rollers
  • Packaging conveyor spindles
  • Warehouse material rollers
  • Assembly conveyor rollers
  • Belt conveyor shafts
  • Logistics sortation rollers
  • Industrial conveyor joints

Key Requirements: 17mm bore, 19mm width catering to conveyor system requirements

Compatible Models & Shaft Requirements

Find bearings with the same bore size and ensure proper shaft preparation

🔄Related Models

62301 (12×37×17mm) 62302 (15×42×17mm) 62304 (20×52×21mm) 62305 (25×62×24mm)

🔧Shaft Requirements

Nominal Diameter 17.000mm
Tolerance Grade h6 (16.989-17.011mm)
Surface Finish Ra 0.8Ξm max
Runout Tolerance 0.013mm max

ðŸŽŊApplication-Specific Options

High Temperature: C3 clearance recommended
High Speed: RHD V3 & V4 bearings recommended
Corrosive Environment: SS (Stainless Steel) bearings recommended

Professional Expertise & Standards

Technical insights from 20+ years of bearing engineering and manufacturing excellence

📋ISO Compliance

ISO 15:2011 compliant dimensions ensure interchangeability with global bearing standards and seamless replacement in existing equipment.

🔎Material Science

Gcr15 chrome steel composition optimized for wide-bodied bearing applications, providing superior hardness, wear resistance, and fatigue life.

⚙ïļPrecision Engineering

C0 clearance standard for most applications, C3 available for high-temperature use. h6 shaft tolerance recommended for optimal performance.

🔧Professional Installation

Professional installation required for maximum 50,000-hour service life. Proper tools and techniques prevent 80% of premature failures.

📊Performance Comparison

Handles 3.6kN more load than typical 17mm bearings while maintaining compact design. Superior Gcr15 steel vs. standard steel in competing products.

💰Value Engineering

Best value in wide-bodied bearing category for 14.5kN performance. Quality bearings last 3-10x longer than cheap alternatives, reducing total cost of ownership.

FREQUENTLY ASKED QUESTIONS

Expert guidance for 62303 bearing applications

Bearing Selection & Replacement ▾

What makes 62303 bearing suitable for wide-bodied applications?

62303 features 19mm width (vs 12mm standard) providing enhanced load distribution and stability for demanding applications.
Why This Matters
Wide-bodied design reduces stress concentration, extends bearing life, and improves overall system reliability.
How To Handle It
Verify housing dimensions accommodate 19mm width and ensure proper alignment during installation.
Wide-bodied bearings are ideal for applications with high radial loads or where space allows for increased width.

Can 62303 replace standard 17mm bore bearings?

Yes, 62303 can replace standard 17mm bore bearings when enhanced load capacity and stability are required.
Why This Matters
Provides upgrade path for applications experiencing premature bearing failures or requiring higher load ratings.
How To Handle It
Check housing width compatibility (19mm vs 12mm standard) and verify load requirements match 1479.0kg (14.5kN) rating.
Always verify dimensional compatibility before replacement, especially width requirements.

What are the key advantages of 62303 over standard 17mm bearings?

62303 offers 19mm width, 1479.0kg (14.5kN) dynamic load capacity, and enhanced stability compared to standard 17mm bearings.
Why This Matters
Wide-bodied design provides superior load distribution, reduced stress, and extended service life.
How To Handle It
Evaluate application requirements and space constraints to determine if wide-bodied design is beneficial.
Consider 62303 for applications with high radial loads or where bearing life is critical.
Installation & Maintenance ▾

What are the proper installation procedures for 62303 bearing?

Use proper tools, maintain cleanliness, apply appropriate force, and ensure correct alignment for 62303 installation.
Why This Matters
Proper installation prevents damage, ensures optimal performance, and maximizes bearing service life.
How To Handle It
Clean shaft and housing, use bearing puller/installer, apply force to inner ring only, and verify smooth rotation.
Never apply force to outer ring during installation as it can damage bearing components.

How often should 62303 bearing be lubricated?

Lubrication frequency depends on operating conditions, speed, and load, typically every 6-12 months for normal applications.
Why This Matters
Proper lubrication reduces friction, prevents wear, and extends bearing service life significantly.
How To Handle It
Use high-quality grease suitable for bearing application, apply appropriate quantity, and monitor lubrication condition regularly.
Over-lubrication can cause overheating, while under-lubrication leads to premature failure.

What maintenance practices extend 62303 bearing life?

Regular inspection, proper lubrication, contamination control, and monitoring operating conditions extend 62303 bearing life.
Why This Matters
Proactive maintenance prevents premature failures, reduces downtime, and optimizes system performance.
How To Handle It
Establish maintenance schedule, monitor vibration and temperature, and replace bearings before catastrophic failure.
Keep detailed maintenance records to identify patterns and optimize maintenance intervals.
Troubleshooting & Problem Solving ▾

What causes 62303 bearing premature failure?

Common causes include contamination, improper lubrication, misalignment, overloading, and incorrect installation.
Why This Matters
Identifying failure causes helps prevent recurrence and improves system reliability.
How To Handle It
Analyze failed bearing, check operating conditions, and implement corrective measures.
Keep failed bearings for analysis to identify root causes and prevent future failures.

How to diagnose 62303 bearing problems?

Monitor vibration, temperature, noise levels, and visual inspection to diagnose 62303 bearing problems.
Why This Matters
Early detection allows for planned maintenance and prevents catastrophic failures.
How To Handle It
Use vibration analysis tools, infrared thermography, and regular visual inspections.
Establish baseline measurements when bearing is new to detect changes over time.

What are signs of 62303 bearing wear?

Signs include increased vibration, temperature rise, noise changes, and visual wear patterns on raceways and balls.
Why This Matters
Early detection of wear allows for planned replacement and prevents unexpected failures.
How To Handle It
Monitor operating parameters, perform regular inspections, and replace bearings when wear exceeds limits.
Document wear patterns to improve bearing selection for future applications.
Cost & Performance Optimization ▾

How does 62303 bearing compare in cost-performance ratio?

62303 offers excellent cost-performance ratio with 1479.0kg (14.5kN) load capacity and extended service life.
Why This Matters
Optimal cost-performance ratio reduces total cost of ownership and improves system efficiency.
How To Handle It
Compare initial cost vs. service life, maintenance requirements, and performance benefits.
Consider total cost of ownership, not just initial purchase price.

What factors affect 62303 bearing total cost of ownership?

Factors include initial cost, service life, maintenance requirements, downtime costs, and replacement frequency.
Why This Matters
Understanding total cost of ownership helps make informed decisions and optimize system performance.
How To Handle It
Calculate all costs over bearing service life and compare with alternatives.
Quality bearings often provide lower total cost of ownership despite higher initial cost.

How to optimize 62303 bearing performance and reduce costs?

Optimize through proper selection, installation, lubrication, and maintenance practices.
Why This Matters
Optimized performance reduces operating costs, extends service life, and improves system reliability.
How To Handle It
Follow manufacturer recommendations, implement preventive maintenance, and monitor performance.
Invest in proper tools and training for installation and maintenance to maximize bearing performance.
ðŸ”Ĩ FAST DELIVERY

Need 62303 Bearings Today?

Get instant pricing and availability for premium 62303 bearings. Same-day dispatch available for orders before 2 PM.

⚡

Instant Quote

Real-time pricing & availability

🚀

Same Day Dispatch

Orders before 2 PM ship today

🏆

Premium Quality

ISO certified, 20+ years expertise

📞 Call Now +91-9702081858 📧 Email Quote Instant Response
RHD Bearings Your Trusted Bearing Partner
📍 203 Vihar Estate, Sakinaka, Andheri East, Mumbai 400072
OEM Sales: oemsales@rhdenterprise.in
Bulk Orders: Significant discounts available
BEARINGS