Home > 6000-series > 6013 Bearing

6013 Bearing 65x100x18mm 32kN Load | RHD Bearings

Like a good wine, gets better under pressure - 32kN of refined strength in a classy 65mm package.

Meet the 6013: With 3261kg (32.0kN) of engineering excellence and 65mm precision, this bearing delivers the perfect blend of personality and performance for your critical applications. The most widely used bearing in electronics, small motors, and precision instruments.

65mm
Bore Diameter
100mm
Outer Diameter
18mm
Width
32.0 kN
Load Rating
3261 Kg
Load Capacity
0.41 Kg
Weight
Technical Specifications Applications 📞 Call +91-9702081858
6013 Bearing 65×100×18mm - RHD Bearings

6013 BEARING SPECIFICATIONS

Precision-engineered for reliability and performance

🔍 Common Search Terms

6013 bearing specifications 65mm bore bearing replacement 32kN load capacity bearing 6013 bearing dimensions deep groove ball bearing 65mm industrial bearing 6013

📏Dimensions

d - ID (Bore Diameter)
65mm
D - OD (Outer Diameter)
100mm
B - Width
18mm
d₁ - Shoulder Diameter
≈76.3mm
D₂ - Recess Diameter
≈91.5mm
r₁,₂ - Chamfer Radius
min. 1.1mm
6013 Bearing: 65 × 100 × 18mm

Cross-Sectional View

6013 Bearing Cross-Sectional View

⚡Load Ratings

Dynamic Load (Cr) 32.0kN
Static Load (Cor) 24.8kN
Load Capacity (kN) 32.0kN
Load Capacity (kg) 3261kg

ðŸ’ĄWhat This Means

Dynamic Load (32.0kN): Maximum force while rotating. Exceeding this causes rapid wear and failure within hours.
Static Load (24.8kN): Maximum force when stationary. Use 80% for safety.
Calculate Your Load: Measure shaft forces, belt tensions, or gear loads. Include shock/vibration factors.
Failure Warning: Overloading causes bearing raceways to crack and balls to flatten permanently.

🔄Speed Limits

Grease Lubrication 6000 RPM
Oil Lubrication 7000 RPM
RHD Z2V2 Bearings 1400 RPM
RHD Z3V3 Bearings 2880 RPM
RHD Z4V4 Bearings 6000+ RPM

ðŸ’ĄWhat This Means

Grease Limit (6000 RPM): Heat generation increases exponentially above this. Grease breaks down, causing seizure.
Oil Advantage (7000 RPM): Better heat dissipation allows higher speed. Required for high-speed spindles.
Safe Operating Speed: Use 90% of limit (5400 RPM) for maximum L10 life of 10,000+ hours.
Failure Mode: Exceeding speed causes cage failure, ball skidding, and catastrophic overheating within minutes.

🔧Material & Quality

Steel Grade SAE52100
Ball Grade G10
Carbon Content 0.95-1.05%
Chromium Content 1.40-1.65%
ISO Standard 15:2011 Compliant

ðŸ’ĄWhat This Means

SAE52100 Chrome Steel: Premium bearing steel - harder than tool steel
G10 Balls: Ultra-precision balls with Âą0.25Âĩm tolerance
High Carbon: Superior hardness and wear resistance
Chromium: Adds corrosion resistance and toughness
ISO Standard: Fits any 6013 application worldwide

📊Vibration Classes

V2 Grade
Low: 130 Ξm/s
Med: 100 Ξm/s
High: 150 Ξm/s
V3 Grade
Low: 105 Ξm/s
Med: 80 Ξm/s
High: 105 Ξm/s
V4 Grade
Low: 50 Ξm/s
Med: 50 Ξm/s
High: 75 Ξm/s

ðŸ’ĄWhat This Means

V2 Grade: Standard grade - good for general applications
V3 Grade: Low vibration - like a smooth car engine
V4 Grade: Ultra-smooth - for precision instruments
Frequency Bands: Measured across different rotation speeds

🔇Noise Levels

Z2 Grade < 46 dB
Z3 Grade < 41 dB
Z4 Grade (Quiet) < 36 dB
Application Precision Equipment

ðŸ’ĄWhat This Means

Z2 Grade: Quiet as a library - good for most applications
Z3 Grade: Very quiet - like a whisper (40 dB = normal whisper)
Z4 Grade: Ultra-quiet - perfect for bedroom fans, medical equipment
Application: Ideal for sensitive environments

⚙ïļInternal Clearance

C2 (Tight) 1-15 Ξm
C0 (Normal) 8-28 Ξm
C3 (Loose) 23-43 Ξm
C4 (High Temp) 38-61 Ξm
C5 (Extra High Temp) 55-90 Ξm

ðŸ’ĄWhat This Means

C2 (Tight): Precision applications - less play, more accurate
C0 (Normal): Standard choice - works for most applications
C3 (Loose): Better for hot environments - allows thermal expansion
C4 (Exta Loose): Hot or tight-fit setups — extra room for thermal expansion.
C5 (Max Loose): Extreme heat/tight fits or near-limit speeds — maximum expansion allowance

SEAL OPTIONS

Choose the right protection for your application

6013-ZZ

Most Popular

Double metal shields

Speed Factor: 0.9 (5400 RPM)
Protection: Dust protection
Lubrication: Sealed for life

When to Use 6013-ZZ

Best For: Electronics, small motors, skateboards, general machinery
Conditions: Dry environments, moderate dust, precision applications
Achieves: Excellent balance of speed and protection for most applications
Avoid When: Heavy water exposure, chemical environments, food processing

6013-2RS

Protected

Double rubber seals

Speed Factor: 0.7 (4200 RPM)
Protection: Moisture and dust
Lubrication: Sealed for life

When to Use 6013-2RS

Best For: Outdoor applications, appliances, automotive systems, dirty environments
Conditions: Moisture, dust, contamination, washdown areas, food processing
Achieves: Maximum protection and zero maintenance requirements
Trade-off: Lower speed limit but superior environmental protection

6013

High Speed

Open bearing, no seals

Speed Factor: 1.0 (6000 RPM)
Protection: None
Lubrication: External required

6013-Z

Balanced

Single metal shield

Speed Factor: 0.95 (5700 RPM)
Protection: Light dust protection
Lubrication: Pre-greased

6013-RS

Protected

Single rubber seal

Speed Factor: 0.8 (4800 RPM)
Protection: Moisture and dust
Lubrication: Pre-greased, sealed

APPLICATIONS

Precision performance across industries

Mixer Shafts

  • Concrete mixer drums
  • Feed mixer shafts
  • Chemical agitator shafts
  • Paint mixer drives
  • Food processing mixers
  • Pharmaceutical mixers
  • Ceramic slurry agitators
  • Batch blending drums

Key Requirements: 65mm shaft with 33.50kN (≈3,415kg) dynamic load, 5,200 RPM grease lubrication, 120×30mm for mixing equipment

Heavy Rollers

  • Steel mill rollers
  • Paper mill rollers
  • Rubber processing drums
  • Textile machine rollers
  • Packaging machine rollers
  • Construction conveyor rollers
  • Printing press rollers
  • Aggregate crushing rollers

Key Requirements: Precision 65mm bore with 20kN (≈2,040kg) static load, wear resistant for rollers

Industrial Carts

  • Material transfer carts
  • Forklift support wheels
  • Heavy duty platform carts
  • Rail transfer wagons
  • Mining transport carts
  • Warehouse utility dollies
  • Construction site carts
  • Agricultural tool carts

Key Requirements: 65mm bore, 30mm width, sturdy for industrial carts

Compatible Models & Shaft Requirements

Find bearings with the same bore size and ensure proper shaft preparation

🔄Related Models

6213 (65×120×23mm) 6313 (65×140×33mm) 6813 (65×85×10mm) 6913 (65×90×13mm)

🔧Shaft Requirements

Nominal Diameter 65.000mm
Tolerance Grade h6 (64.987-65.000mm)
Surface Finish Ra 0.8Ξm max
Runout Tolerance 0.013mm max

ðŸŽŊApplication-Specific Options

High Temperature: C3 clearance recommended
High Speed: RHD V3 & V4 bearings recommended
Corrosive Environment: SS (Stainless Steel) bearings recommended

Professional Expertise & Standards

Technical insights from 20+ years of bearing engineering and manufacturing excellence

📋ISO Compliance

ISO 15:2011 compliant dimensions ensure interchangeability with global bearing standards and seamless replacement in existing equipment.

🔎Material Science

Gcr15 chrome steel composition optimized for heavy-duty applications, providing superior hardness, wear resistance, and fatigue life.

⚙ïļPrecision Engineering

C0 clearance standard for most applications, C3 available for high-temperature use. h6 shaft tolerance recommended for optimal performance.

🔧Professional Installation

Professional installation required for maximum 50,000-hour service life. Proper tools and techniques prevent 80% of premature failures.

📊Performance Comparison

Handles 0.5kN more load than 6012 while maintaining same width. Superior Gcr15 steel vs. standard steel in competing products.

💰Value Engineering

Best value in 65mm bearing category for 32kN performance. Quality bearings last 3-10x longer than cheap alternatives, reducing total cost of ownership.

FREQUENTLY ASKED QUESTIONS

Expert guidance for 6013 bearing applications

Bearing Selection & Replacement ▾

What clearance should I choose for the 6013 bearing?

C0 (normal clearance) is standard for most 6013 bearing applications, providing optimal performance under normal operating conditions.
Why This Matters
Proper clearance selection affects bearing performance, noise levels, and service life. Wrong clearance can cause premature failure or excessive wear.
How To Handle It
Use C0 clearance for standard applications. Consider C3 clearance for high-temperature applications or when thermal expansion is a concern.
For high-speed applications, C3 clearance may be beneficial as it accommodates thermal expansion and reduces friction.
Installation & Maintenance ▾

What is the expected service life of the 6013 bearing?

Under proper operating conditions, the 6013 bearing can provide 50,000+ hours of service life with appropriate maintenance and lubrication.
Why This Matters
Understanding expected service life helps with maintenance planning, inventory management, and total cost of ownership calculations.
How To Handle It
Monitor bearing condition regularly, maintain proper lubrication, and replace bearings before they reach end of life to prevent equipment damage.
Service life can vary significantly based on load, speed, temperature, and maintenance practices. Regular condition monitoring is essential.
Troubleshooting & Problem Solving ▾

How do I identify bearing failure in the 6013?

Common signs of 6013 bearing failure include increased noise, vibration, heat, and reduced performance or complete seizure.
Why This Matters
Early detection of bearing failure prevents catastrophic equipment damage and reduces downtime and repair costs.
How To Handle It
Implement regular condition monitoring, use vibration analysis, and establish maintenance schedules based on operating conditions.
Keep spare bearings in stock and establish emergency replacement procedures to minimize downtime when failures occur.
Cost & Performance Optimization ▾

How can I optimize the performance of my 6013 bearing?

Optimize 6013 bearing performance through proper installation, regular maintenance, appropriate lubrication, and monitoring operating conditions.
Why This Matters
Optimized performance extends bearing life, reduces maintenance costs, and improves overall equipment reliability and efficiency.
How To Handle It
Follow manufacturer guidelines, implement preventive maintenance, use quality lubricants, and monitor bearing condition regularly.
Keep detailed maintenance records and use condition monitoring to identify optimization opportunities and prevent problems before they occur.
ðŸ”Ĩ FAST DELIVERY

Need 6013 Bearings Today?

Get instant pricing and availability for premium 6013 bearings. Same-day dispatch available for orders before 2 PM.

⚡

Instant Quote

Real-time pricing & availability

🚀

Same Day Dispatch

Orders before 2 PM ship today

🏆

Premium Quality

ISO certified, 20+ years expertise

📞 Call Now +91-9702081858 📧 Email Quote Instant Response
RHD Bearings Your Trusted Bearing Partner
📍 203 Vihar Estate, Sakinaka, Andheri East, Mumbai 400072
OEM Sales: oemsales@rhdenterprise.in
Bulk Orders: Significant discounts available
BEARINGS